How to clean your Xbox Series X

Summer has passed and gone, so it’s time to sit inside until Spring returns again. But it’s worth taking the time to clean your Xbox Series X before snuggling under the blanket with a warm drink – to make sure it’s working well before it goes into hibernation.

given the big upcoming Xbox Series X games On the near horizon, you’ll want your beloved console to run as efficiently as the day you bought it. So if you’re wondering how to clean your Xbox Series X inside and out, here’s where to start.

The truth is that no matter how clean and dust-free we keep our homes, it can build up prematurely in and around appliances that draw a lot of power. Eventually this can lead to louder fans, overheating of components, or even complete failure of the hardware. Join us as we explore how to clean the Xbox Series X and remember this: before you do anything, disconnect your console from power and place it on a hard, stable surface.

Basic Xbox Series X maintenance

Quick steps:

• Before cleaning your Xbox Series X, be sure to disconnect the power.
• Place your Xbox Series X on a hard, stable surface.
• Gently clean externally with a soft, lint-free cloth or disinfectant wipes.
• Use a 70% or less isopropyl alcohol (IPA) solution to disinfect your Xbox Series X.
• Clean every 3 to 6 months

External Xbox Series X cleaning guide

Microsoft’s official guidance is that for general maintenance, only exterior cleaning should be done and a soft, lint-free cloth dampened with a small amount of mild soap and water or pre-moistened disinfectant wipes should be used. It is also recommended to repeat this every 3-6 months.

If you want to disinfect your console as well as clean it, Microsoft recommends using a 70% or less isopropyl alcohol (IPA) solution.

Again, don’t forget to completely disconnect your console from power before you go near it with any cleaning supplies.

How to clean dust from your Xbox Series X

Is your Xbox Series X making more noise than usual? This may be due to dust accumulation in the vents and around the fan. Removing this buildup can help reduce this noise and keep the console clean. After making sure that the console is turned off and disconnected from the mains, a low power vacuum cleaner or compressed air to gently remove dust build-up.

Once you have a nice dust-free console, it’s worth taking some time to consider where your Xbox lives – make sure there’s enough free space around the console. In official advice, Microsoft recommends that we do not place the Xbox Series X indoors to avoid heat and soft surfaces. Needs space for your Xbox Series X breathbasically.

How to clean your Xbox Series X

Quick steps:

• Before cleaning your Xbox Series X, be sure to disconnect the power.
• Place your Xbox Series X on a hard, stable surface.
• Peel off the large sticker and the small cover on the back of the console.
• Use a T8 screwdriver to remove the screws and remove the backplate.
• Compressed air and microfiber cloth to remove dust and dirt.
• Replace the back plate and screws.

Built-in Xbox Series X cleaning guide:

inside that official guidance (opens in new tab), Microsoft recommends that you only give your Xbox Series X an external cleanup. However, if you really want to get in there and make sure everything is in top condition, you might want to consider an Xbox Series X internal cleaning. Now it’s worth mentioning that (as long as you don’t break anything and are careful) it doesn’t void your warranty. If you’re not sure what you’re doing, an external clean will usually get the job done.

Fortunately, getting inside your Xbox Series X isn’t too difficult. Before starting a T8 screwdriver – this is a special 6-pointed Phillips head electronic screwdriver, so not something you would find in a simple toolbox.

Make sure your console is turned off and power disconnected Make sure the console is placed on a clean, hard surface before you begin and before attempting an interior cleaning.

peel back big sticker from the back of the console to reveal one of the screws and the small black oval sticker next to the HDMI port to reveal the other.

use yours T8 screwdriver Remember to put these screws in a safe place to remove them. When these are closed, remove the back plate your console.

Now you can use compressed air with care the fan is at the top of the console next to the row of green holes to remove dust/dirt buildup. You can also use a microfiber cloth to gently remove stubborn parts that the compressed air has not dislodged.

After you’ve all been cleansed, Reattach the back plate until you hear a click, put these two screws back in with yours Plug your T8 screwdriver and console back into the mains. You’ll be ready to jump into Halo Infinite or Forza Horizon 5 again in no time.

Official Xbox Device Service

If your Xbox Series X looks clean and has plenty of ventilation, but is overheating and shutting down. request a Device Service directly from Xbox (opens in new tab).

If you’re not confident in taking your console apart to clean it completely, and whoever blames you, this might be the option for you.