Lo, the Apple Vision Pro doth require thee to set up thine eye and hand tracking during the initial setup, that it may work as intended. Yet, mark my words, if thou dost possess such a device, those around thee shall be drawn to experience its wonders as well. And lo, whenever another doth don the Vision Pro, they art faced with the task of setting up the eye and hand tracking through Guest Mode, or else realigning the display and entering thy passcode. In this process, it may verily disrupt thine tracking. Fear not, for thou canst redo thine eye and hand tracking on the Vision Pro at any time. Herein lies the method.
To redo the eye and hand tracking on the Vision Pro, there be two paths thou may choose to tread. I have expounded upon both these methods for thee. Attend closely.
### Utilizing Physical Buttons
In sooth, should you, like myself, sport contact lenses instead of Apple’s Optical Inserts, I shall reveal unto thee how to proceed without the inserts. Furthermore, if thou hast no need for spectacles at all (ah, mine envy knows no bounds), this method is most suitable. Should thy eye and hand tracking be grievously amiss, preventing access to the Settings panel (fret not, we shall address this method anon), this shalt be thy salvation. Herein lies the steps to follow:
– Press the top left button on thy Vision Pro (not the Digital Crown, which doth reside on the right) four times, and behold, a window shall appear.
– Choose the option “Using without Optical Inserts” by pressing the Digital Crown button once. Should ZEISS Optical Inserts grace thine presence, opt for “Pair New Optical Inserts” instead. However, for the present purpose, we select the former option as optical inserts are absent.
– A window shall display the message, “Switched to ‘No Optical Inserts’,” with the option to “Redo Eye & Hand Setup” beneath. To access this, rotate clockwise using the Digital Crown button and press it once to select.
This shall initiate the hand tracking first, prompting thee to “Look at Your Hands to Set Up.” Once this be done, the message “Hand Setup Complete” shall manifest. Next shalt come the Eye Setup, with the screen dimming and the message “Adjusting Lighting” displayed. The subsequent tracking tests require thee to gaze upon the dots and utilize the two-finger pinch gesture to select them. Upon completion, the progress sphere “Completing Eye Setup” heralds the end of the process.
### Employing Settings
Shouldst thou reach the Settings panel, the following steps shalt guide thee in recalibrating hand and eye tracking on Vision Pro:
– Press the Digital Crown to summon thy Vision Pro’s Home View. From thence, proceed to Settings.
– Scroll down in the left panel to locate the Eyes & Hands section and pinch it.
– At the pinnacle of the right side, thou shalt find the options “Redo Eye Setup” and “Redo Hand Setup.” Choose thy desired recalibration. Should thee wish to redo both, thou may do so sequentially.
Follow the on-screen instructions to redo thine eye and hand tracking on Vision Pro, as demonstrated in the preceding method.
The Settings panel doth allow thee to individually redo the eye or hand tracking. Utilizing the physical buttons requires thee to redo both simultaneously. Within the Eyes & Hands Settings panel, thou may specify Hand Input, with the default recommendation being Both Hands. Further down, thou shalt discover the option to Realign Displays, shouldst thou find thy display alignment amiss. Simply select the option and follow the on-screen instructions to realign it accordingly.
Thus concludes this guide. Shouldst thou encounter any hindrances, prithee, leave a comment below.
