iPhones generally work pretty well. Usually there is no slowdown and updates arrive on time and work well. However, you may encounter some issues with your iPhone from time to time, and one of the most common problems people face is iPhone stuck in a boot loop. So, if you are wondering “why is my iPhone showing the Apple logo and shutting down”, we have all the solutions for you. Here is how to fix iPhone stuck on Apple logo problem.
Why Is My iPhone Showing the Apple Logo?
Before we take a look at the solutions, let’s try to understand the problem. Why does your iPhone show the Apple logo and then turn itself off? There are several reasons why you might encounter such a problem.
If you have jailbroken your iPhone, it can cause errors like this. Also, something might have gone wrong while updating your iPhone, or in the worst case, it could be a hardware failure.
How to Fix iPhone Keeps Showing Apple Logo and Turning Off
There are many solutions you can try to fix this problem. We’ll take a look at them all, from the easiest and safest solution to other alternatives you can try if you want.
1. The Fastest and Easiest Way to Solve iPhone Keeps Apple Logo On and Off
The first solution we share with you is also the safest and most effective method of solving this problem. In this method, we will use Tenorshare ReiBoot for iOS. You can download the software from this link.
If you are facing the iPhone X that keeps showing the Apple logo and shuts down, this is the best and safest way to fix the problem.
Here is how to use Tenorshare ReiBoot to fix iPhone showing Apple logo and shutting down
- Launch ReiBoot on your computer and connect your iPhone.
- Click the ‘Start’ button.
- You will see two types of repair options. Select ‘Standard Repair’.
- Click ‘Download’ to download the latest firmware.
- Once the download is complete, click on ‘Start Standard Repair’.
The process will now begin. Make sure to keep your iPhone connected to your PC or Mac throughout the process. Once complete, your iPhone will boot up normally. The best part about using Tenorshare ReiBoot is that it causes no data loss.
2. The Official Method To Fix My iPhone Keeps Showing The Apple Logo And Turning Off
If you recently tried to restore or update your iPhone and you are facing the problem of iPhone stuck on Apple logo and shutting down, you can also try the official method recommended by Apple. Here’s how to fix my iPhone 8 keeps showing the Apple logo and shutting down with iTunes.
- Put your iPhone in recovery mode. The method to do this is different depending on the iPhone you have.
- On iPhone 8 or later, press and release the volume up button. Press and release the volume down button. Now press and hold the side button (power button) until you see the recovery screen.
- For iPhone 7 and 7 Plus, press and hold both the volume down button and the sleep/wake button (power button). Keep holding the volume down button until you see the recovery screen.
- For iPhone 6s and earlier, press and hold both the sleep button (power button) and the home button. Keep holding the home button until you see the recovery screen.
- With your iPhone in recovery mode, connect it to your Mac or PC with iTunes. You will see a prompt to update or restore your iPhone. Select ‘Update’.
3. Other Ways That May Work To Solve iPhone Keeps Showing The Apple Logo And Then Turning Off
Hard Reset Your iPhone
If your iPhone is stuck on the Apple logo, sometimes a hard reset can fix it. Here’s how to reset your iPhone.
iPhone 8, iPhone SE 2020, iPhone X and later
- Press and release the volume up button, press and release the volume down button. Now, hold down the side button. Release the button when you see the Apple logo.
iPhone 7 and 7 Plus
- Press and hold the volume down and sleep button at the same time. Release both buttons when you see the Apple logo.
iPhone 6s or earlier
- Press and hold the sleep button and home button. Release the buttons when you see the Apple logo.
Charge Your iPhone
Sometimes you might get stuck on the Apple logo because your iPhone doesn’t have enough battery to fully boot up. If you suspect this might be the case, charge your iPhone for a while.
Then try restarting your iPhone and see if the issue is resolved. If not, you can check out some of the other methods mentioned in this article.
DFU Restore
You can also try performing a DFU restore on your iPhone that keeps showing the Apple logo and then shuts down. This solution can sometimes fix firmware issues that can cause the problem.
- First, put your iPhone in DFU restore mode. Here’s how to do this for different iPhone models.
- iPhone 8 and above
- Connect the device to a computer using a USB cable.
- Quickly press the Volume Up button
- Quickly press the Volume Down button
- Press and hold the Side button until the screen goes black, then press and hold both the Side button and the Volume Down button.
- After 5 seconds, release the Side button while continuing to hold the Volume Down button.
- iPhone 7 and 7 Plus
- Connect the device to a computer using a USB cable.
- Press and hold both the Side button and the Volume Down button.
- After 8 seconds, release the Side button while continuing to hold the Volume Down button.
- iPhone 6s and earlier
- Connect the device to a computer using a USB cable.
- Press and hold both the Home button and the Lock button.
- After 8 seconds, release the Lock button while continuing to hold the Home button.
- iTunes will notify you that a device is connected in recovery mode. Now you can use iTunes recovery options to try and fix your iPhone.
4. Hardware Problem? Contact Apple Support
If nothing is working, your iPhone may have a hardware issue that is causing it to get stuck on the Apple logo and shut down. In such a case, you should contact Apple support to have your iPhone repaired.
You can contact Apple support at this link.
Solve iPhone Keeps Showing Apple Logo And Then Turns Off With These Methods
Your iPhone constantly showing the Apple logo and then shutting down is never a funny sight. However, as you can see in this article, there are many solutions that you can try to fix this problem. Obviously, the best method to use is simply Tenorshare ReiBoot (download) fixes your iPhone without any data loss. However, there are other solutions you can try.
So, were you able to fix your iPhone’s boot loop issue? Let us know in the comments.
