You may have missed it during the initial configuration by your operator’s technician. However, the need to access your internet box’s management interface will arise relatively often. There will come a time when you need to change the Wi-Fi password, change DNS addresses directly at the modem level, or even control who is accessing your network.
Accessing the administration panel of all boxes is very simple but not easy for everyone. In this guide, we will show you how to do this, depending on the situation. The process is pretty similar whether you’re at Free, Orange, SFR or even Bouygues Telecom.
192.168.1.1: a nearly universal IP address
An IP address to remember: 192.168.1.1. This string of numbers is required to access the management interface of most Internet boxes. Her’address between Default login for most of the routers in the market. You need to add this to your web browser’s address bar. But first, make sure you’re well connected to the box’s Wi-Fi or via an Ethernet cable.
How do I access the Orange Livebox administration panel?
The process is the same for Livebox 4, 5 or 6. If you’re on Orange, you can proceed as follows:
- Enter the address 192.168.1.1 Where in the address bar of your web browser.
- After entering the admin interface, enter Login. If it has never been changed, executive
- Password : the first eight characters of the default WiFi security key. It is located on the back of your Livebox.
How do I access the Freebox administration panel?
To access the management interface of any Freebox, make sure you are connected to the box via WiFi or Ethernet.
- To enter: mafreebox.freebox.fr in your browser’s address bar, then verify.
- Enter your password to access administration. Therefore, you must have the authentication code.
- If this is your first login, you need to set a login password to get started. Click the link First Link.
- An authentication message then appears in the Freebox Server box. Press right arrow box to allow password change.
- Enter your password and click sign in to identify you.
Bouygues Telecom: How to access Bbox administration panel?
Regardless of the model of your bbox, the interface connection process is the same. Connect to the box’s network via WiFi or wired.
- go to address from a web browser or enter the IP address 192.168.1.254
- If this is not the first login, you will need to enter the password (which you need to know).
- If this is the first link, click the button Start installation to configure the box (including a password).
How to access SFR box management interface?
The method differs slightly depending on the SFR box you are using. To get started, connect your computer, smartphone or tablet to the box via cable or WiFi.
- To enter: Where 192.168.1.1 in the address bar of a web browser and verify.
- click Maintenance Then Management. In some models more configure your modem » Management.
- if asked, press 5 seconds on service button to confirm your physical access to the box.
- From this step, you can choose the authentication mode: press the service button, password or both.
Finally, note that the IP address 192.168.1.1 does not work on some SFR boxes. In that case, try 192.168.0.1 instead.
