PS5 landscape or portrait placement: How to switch PS5 between orientations?

Considering Sony’s latest console is huge to say the least, knowing how to position your PS5 horizontally or vertically is important information. next to your TV. Before doing this, make sure you have the black plastic base required in both positions as well as a thin coin or screwdriver to turn it. It’s important to do this correctly to avoid this Whether you’ve just been able to buy a new PS5 or are wondering how to switch PS5 between directions, here’s what you need to know to keep your new machine safe.

How to adjust PS5 horizontal position?

As you’ve probably noticed, the PS5’s design has moved away from the straight lines of previous consoles, which means there isn’t actually a flat surface to lay the PS5 on horizontally – this goes for both models, but it’s more noticeable than the digital version with the prominent disc drive. In either case, you must attach the supplied base before using your PS5 in a landscape position.

First, while looking straight up along the slope of the base, check that the hooks are in the roughly 10 o’clock position – this should be the default out-of-the-box position, but if not, you can rotate the hooks until they stop. Click instead. Next, look for the row of PlayStation symbols on the lower back panel and align the hooks to connect at both ends of the row, then press firmly into the base. You can now position the PS5 horizontally, but note that the base is not securely attached in this position, so the base may slide if you try to drag your console and the non-slip pads.

How to set up PS5 vertical position

Despite having a flat surface on the side/bottom of the console, it’s narrow and can tip over, so you’ll need to reattach the included base to place the PS5 vertically. While looking straight up along the bevel of the base, check that the hooks are aligned at the 12 o’clock position – if not, turn the hooks until they click into place.

Flip the base over and you’ll see a panel pop open to reveal a screw, along with a small indentation to hold the screw hole cover. Remove the screw hole cover from the side/bottom of the console, insert it into the base recess, then remove the screw. Attach the base to the console, then insert the screw through the center hole and secure in place – the screw is designed to be tightened with a blade/flat head screwdriver or coin or similar shaped piece. Once the base is fixed, you can safely position your PS5 vertically.

PS5 tips | How to eject PS5 disc | Where is the PS5 power button | How to turn off PS5 | PS5 standby mode | PS5 storage | PS5 compatible SSD | PS5 error codes | PS5 game sharing | PS5 Media Gallery